Cable Wire Crusher and Separator
This Plant is specializing in recycling auto-wire, communicate cable,and other mixed copper wire/cable.
The cable wire crusher consists of crusher, separator, dust extractor and electric control panel.
Operation of cable wire crusher and separator
1¡¢ starting
Before starting, please check if the plant is in good condition, the turning direction is correct, the electric equipment is with earth connection.
Please clear up excess stock before getting the plants started,no load for 5-10 miniutes
Attention£ºplease starting up machines in proper sequence→suction fan1→suction fan 2→bottom blower→feeding fan →riddler→granulator
Attention£ºplease shut down machines in proper sequence→
Riddler→blower→suction fan1→suction fan 2→feeding blower→granulator£©
2¡¢adjusting the riddler and bottom blower

The left black button is to adjust the bottom blower. Turn counterclockwise to reduce the force, and turn it clockwise to increase the force.
Please watch the left frequency converter inside the electric cabinet, and adjust the blower force step by step. Do not turn it rapidly to avoid destroying the copper wire crusher machine.


The right black button is to adjust the riddler. Turn counterclockwise to reduce the force, and turn it clockwise to increase the force.
Please watch the right frequency converter, and adjust the riddler slowly. Do not turn it rapidly to avoid destroying the copper wire crusher machine.


Please turn the bottom blower button and riddler button counterclockwise to zero before shut off the copper wire granulator machine.
3¡¢Infeed
Please clear up iron from the mixed cables before feeding to the cable wire crusher.
Please control the material feeding according to the speed of copper wire crusher.
